View Full Version : Bios P28 (help)
annaconda
06-28-2007, 06:48 PM
Ok i need help my motherboard is not reading my floppy for some reason, i tried 2 different ones and its keep giving me floppy error 40.
But any ways is there is another way i can FLASH BIOS, i know other motherboards like EVGA is letting you install by CD, can you guys upload P28 bin file please for this motherboard.
Thanks.
Scott
06-28-2007, 07:19 PM
Try replacing the floppy drive cable.
annaconda
06-28-2007, 09:13 PM
I will try and see.
Kougar
06-28-2007, 09:29 PM
Also make sure the cable is connected with the correct end in the floppy drive, and that it is also not connected upside-down. Some cables still are not notched to show it will only work one way. The little hole in the cable with the twisted bit needs to be the end connected to the floppy drive.
Bio-Hazard
06-28-2007, 09:49 PM
I uploaded the bios files for Miles a while back over here:
http://www.bjorn3d.com/forum/showthread.php?t=13742&page=2
There's also instructions on how to make a boootable USB flash drive for flashing your bios.
xfxsupport
06-28-2007, 10:26 PM
I teamed with the engineers and the information for bios updated from a CD will be on our website in the near future.
XFX Support
annaconda
06-28-2007, 11:49 PM
that bios is old man where is p28 bin file.
Bio-Hazard
06-29-2007, 12:50 AM
These were the only ones listed on XFX's web site for the 680i board.
Miles
06-29-2007, 10:03 PM
Use the XFX version listed above that is the most recent BIOS out for their 680i...The flash software will not let you use the NV version of the BIOS.
vBulletin® v3.7.0 Release Candidate 3, Copyright ©2000-2008, Jelsoft Enterprises Ltd.