Intel C2D E6750 up and running.

[Bio-Hazard]

Got the CPU this morning, got it installed in my el-cheapo MSI P6N SLi-Fi board and it's up and running just fine. The board saw it at first boot without any issues and I went into the bios to reset everything to get it ready for a little OC action. I'm going to be taking things a little slow cause of the new core, but things are looking fairly good right now except nothing is really giving me the correct temps except for the MSI utility (I think)........:jawdrop:.

http://img267.imageshack.us/img267/8776/dsc00102wz2.jpg

http://img388.imageshack.us/img388/4416/dsc00103fo6.jpg

http://img502.imageshack.us/img502/418/675032jx1.jpg

[Victor]

looks good.

[werty316]

Sweet; whats the cpu voltage set at?

[Bio-Hazard]

Default, software shows 1.31 load, I need to look at the bios health screen to see what's showing there, but I'm sure it's halfway close to that. Only thing I had to adjust was the NB voltage just like every other push to 1600 FSB.

[Kougar]

Nice, enjoy your new toy! And be sure to keep us posted on how well it OCs :)

['Amp!']

I eagerly await your results Bio with the e6750.

I am deciding between the e6750, e6850 and maybe the Q6600 as I do 3D rendering and some video editing. Not terribly much but enough.


The more details the better. :icon_tiphat:

[Bio-Hazard]

Next step is now under way now that I got past that damned FSB hole..........;) I forgot to lower the Vcore after fighting with the FSB hole, but no big deal I guess, it's still running plenty cool.

http://img165.imageshack.us/img165/659/675036lw1.jpg

['Amp!']

Are you telling me you are hitting ONLY 43C at load on this bad boy? :jawdrop:

I assume the 30C is at idle. What is your ambient temperature?
This new CPU looks to have potential!

[darkorb]

is ur cpu volt at 1.35(coretemp) or 1.43 (that program open)

[Bio-Hazard]

The 30c is CoreTemps load, I think it's off by around 15c, just guessing though. CoreTemp is saying that my idle temp is 7 to 8c which is a little on the cool side of things. My room ambient temperature is between 23-24c right now.

I think the MSI program is more than likely pretty close.

The 1.35 thats listed in CoreTemp is what CoreTemp thinks the default Vcore is. The vcore I'm running is what's shown in the MSI program.

I don't know if its the chip of my MoBo, but I don't think I'm going to get much more out of the thing, I tried going to 3.7 and was having problems, very unstable, even boosting the vcore up to 1.6. I may beable to get a bit more, still have a few other things to try............;)

[Miles]

Got my E6850 today Bio, can't wait to start testing this baby.

[Bio-Hazard]

Cool, hope you can push that thing to 4 GHz..........;)

[Bio-Hazard]

I got around to running a little SuperPi today.........;) Bested my best time from my E4300 by like a second and a half with my new E6750................:):icon_tiphat: