PDA

View Full Version : 7600 GT XXX wont run in sli right


lostman
10-24-2007, 03:49 AM
Hey to everyone: :grin:
I have two 7600 GT-xxx video cards that run very well by themselves. But when I enable SLI I get all sorts of colored lines and dots in display. I have had this problem right from the very begenning. I replaced the asus motherboard I was using with an evga 680sli and still have same problem. replaced My intel 955 chip to a 6600 quad and still same problem. I was running windows xp/32, xp/64 and now vista 32/64 ultimate and still have same problem.

XFX Ticket #63492. I tried to upgrade the bios but the cards would not flash. I am ready to buy 8800 but they probably will not be XfX. I am very disipointed with my choice to purchase XfX products. I beleive there was something wrong with these cards right from the day I received them! I have done everything XfX has asked me to do. They have not had me RMA them as of yet and I am getting a bit sick of spending my money on buying different components to try and fix a problem that is in my cards. I hope that this post might get me a little more satifaction from XfX and either get these fixed or get another set of them.

Lostman
System: Evga 680sli motherboard, Ultra 600 sli ready psu, Intel 6600 Quad processor, four 80 gig sata seagates running raid 0 & raid 5, 3gig of Ultra XL-6400 running at 800Mhz. two XFX 7600 (wishing they would run In Sli)& a Samsung 21 inch monitor.

xfxsupport
10-24-2007, 06:15 PM
This is usually solved with the BIOS update. Did you try the floppy update or windows update? Try running SLI without the SLI bridge connected and see if that gets rid of the distortion. Looks like you havent responded to your ticket since the 4th of this month, I recommend if you wish to get your issue resolved continue to update your ticket. Verify you shipping address and phone number provided is correct and I can arrange so you can send the video cards in for testing.

lostman
10-24-2007, 10:04 PM
Ok, have tried the Bios update thru windows have not tried with floppy, need instructions on that one. will update my personal info and try removing the brige, and will also try floppy.

Thank You

Tim Mc