PATRIOT Memory issue

[milton]

I am running the following meory kits from Patriot, and am having memory errors. PC2-6400 800MHZ 2GB(2X1GB) KIT X2 TOTAL=4GB

mEMTEST-86 V3.4 RETURNED FOLLOWING ERRORS AFTER 5 HOURS OF RUNNING.
Errors per slot 0:31, 1:27,2:41,3:26 test#7=105 and test#8=22

System is running in normal mode, no overclocking etc. voltage set at 2.2v
I have been told that 680ilt does not work correctly with 4 stick of memory.

Any comments???

[Miker]

Set RAM to 2T and 4 sticks might work. No DDR motherboard likes 4 sticks, they all like 2, but some work with 4.

[werty316]

Filling all of the DIMM slots on a motherboard puts a larger load/strain on the memory controller as apposed to just filling only two slots so make sure the "Command Per Clock" in your motherboard's BIOS is set at "2T".

http://www.bjorn3d.com/Material/revimages/motherboards/xfx_680i_lt/bios_7.jpg