Problems with 680i LT after P07 update.

[zyntax]

Hi.

Yesterday my system was working perfectly.
I decided that i wanted to update the bios to P07.

My system specs:
XFX nForce 680i LT SLi
Intel Quad Core Q6600
RAM Corsair CM 2X2048-6400
2x Gainward Geforce 8800GTS
Corsair Powersupply 750W TX750

After the BIOS update, it sounds like everything is starting up fine, except i get no picture.
Like it stops before the BIOS initalises.

Anyone have a clue of what to do?
I have done nothing other then upgrading the BIOS, before the bios upgrade the system was working perfect.

[funkyman23]

clear cmos read in your manual where it is and if that dont works then pull out battery for 10 min ,and did it finnish till the end of bios flash if not then u got corrupt bios chip and u need to buy another one or find some pc servis with eeprom burner so they can flash it outside your motherboard

[zyntax]

clear cmos read in your manual where it is and if that dont works then pull out battery for 10 min ,and did it finnish till the end of bios flash if not then u got corrupt bios chip and u need to buy another one or find some pc servis with eeprom burner so they can flash it outside your motherboard

The flash process did finish so i dont think the BIOS chip is corrupt.

I will try the other things when i get home from work.
Will post what happened then.
Hopefully pulling the batery will solve the issue.

[zyntax]

Removing the CMOS battery did the trick! :grin:

[funkyman23]

ok i am glad i can help :grin: , do the defaults in bios and u are done