Enermax TBSilence 120mm Fans

[RSS_Poster]

Enermax's new 120mm fans are colorful, and look nice, but how do they hold up in our torture testing? Keep reading to find out!http://feeds.feedburner.com/~ff/Reviews_at_Bjorn3D?d=yIl2AUoC8zA (http://feeds.feedburner.com/~ff/Reviews_at_Bjorn3D?a=pb9BIHZFiWk:TnTAI1P2yE4:yIl2A UoC8zA) http://feeds.feedburner.com/~ff/Reviews_at_Bjorn3D?i=pb9BIHZFiWk:TnTAI1P2yE4:V_sGL iPBpWU (http://feeds.feedburner.com/~ff/Reviews_at_Bjorn3D?a=pb9BIHZFiWk:TnTAI1P2yE4:V_sGL iPBpWU) http://feeds.feedburner.com/~ff/Reviews_at_Bjorn3D?d=qj6IDK7rITs (http://feeds.feedburner.com/~ff/Reviews_at_Bjorn3D?a=pb9BIHZFiWk:TnTAI1P2yE4:qj6ID K7rITs) http://feeds.feedburner.com/~ff/Reviews_at_Bjorn3D?i=pb9BIHZFiWk:TnTAI1P2yE4:gIN9v FwOqvQ (http://feeds.feedburner.com/~ff/Reviews_at_Bjorn3D?a=pb9BIHZFiWk:TnTAI1P2yE4:gIN9v FwOqvQ)
http://feeds.feedburner.com/~r/Reviews_at_Bjorn3D/~4/pb9BIHZFiWk

More... (http://feedproxy.google.com/~r/Reviews_at_Bjorn3D/~3/pb9BIHZFiWk/2099.html)

[Frag Maniac]

You don't seem to specify where you mounted the fans, which is crucial information. Ideally I'd like to see them mounted to a 120mm rad to get an idea of how effective their static pressure is. It also eliminates any inefficiencies of case design.

[Blacksmith1]

It states quite clearly that they were mounted to a copper heat-pipe HSF assembly in an open case. Thus taking the case completely out of the equation.

Testing consisted of using each fan in turn on a copper heat-pipe cooler attached to the CPU, measuring idle and full load temps, with the case open. and I'm sure the reviewer would be happy to re test them on a LCS if you'd be so kind as to supply one. ;)

[rrplay]

Thanks for the review and I like these fans ! sure they cost a bit more but would be a nice upgrade.A friend of mine previously recommend Enermax fans that were quite similar [ not sure if they were the exact model] so I may be inclined to check these out.