werty316
05-13-2006, 06:31 AM
Overclocking is probably the most talked about. In our case, we tested for the max stable HTT. This is done by lowering the CPU multiplier to a low of 6x and increasing the HTT to anything beyond 300MHz, HT multiplier is set to 3x (600MHz). We were able to get lucky and reached a max of 340HTT using our old FX-53 processor. This is done using default CPU voltage, DDR memory set at 2.8v and running ASync DDR266 mode. Due to the engineering bios, the o/c portion of the BIOS probably needs some rework as sometimes i can't even POST at 266MHz x 6 even with the lowest adjustments available. We will revisit the o/c again when a new bios arrives.
http://img106.imageshack.us/img106/863/picture6205copy1ir.jpg
Source (http://www.ocworkbench.com/2006/abit/at8-32x/g1.htm)
http://img106.imageshack.us/img106/863/picture6205copy1ir.jpg
Source (http://www.ocworkbench.com/2006/abit/at8-32x/g1.htm)