Post your liquid systems here

[cdawall]

with the fan set to ~1800RPM it is almost silent





PSU flip seems to have dropped the exhaust temps a good bit and cpu temps are very similar until the fan winds up to 3k then it drops a **** ton

[jedihobbit]

While inverting the PSU isn't aiding cooling you make have extended it's life! I've managed to "cook" two PSUs in a mATX build as it ended up being the primary exhaust for a very hot running GPU. Seems the temp exceeded the max temp for some kind of thermal goop or whatever, causing it to melt and short out things!

[cdawall]

While inverting the PSU isn't aiding cooling you make have extended it's life! I've managed to "cook" two PSUs in a mATX build as it ended up being the primary exhaust for a very hot running GPU. Seems the temp exceeded the max temp for some kind of thermal goop or whatever, causing it to melt and short out things!

it is helping cooling there is a huge vent in the top of the case so it is sucking fresh air in from outside

[jedihobbit]

it is helping cooling there is a huge vent in the top of the case so it is sucking fresh air in from outside

Okay I'm confused........it looks like to me the exit vent on the PSU is pointed out not in??

[cdawall]

Okay I'm confused........it looks like to me the exit vent on the PSU is pointed out not in??

inlet is pointing up at the grating for the case and the out is in the same spot

[mrcmark]

My first water cooling try.
no color theme

[jedihobbit]

My first water cooling try.

Nicely done, all neat and tidy!

no color theme

Ahhhhh.........Red and Blue???

[mrcmark]

thank you.

[peti1212]

Hey Guys,

I have a question for. you. I might be working on a project which will include a SR1 560 radiator with 4x1400RPM 140mm fans in a pull setup. I will also have a BlackIce 240 Radiator to help out, but I will be cooling a Core i7 2600K @ 4.8GHz and 3x 580s in 3-way SLI. Would that radiator setup be enough for my full system loop? I'm not planning on water cooling the memory, motherboard or MOSFETs, just CPU and GPU. Would the pump be powerful enough for that full loop? I am using the D5 pump.

[PP Mguire]

I think it would work. Probably would want push/pull on the 140.4 for extra cooling.

[JJVal]

My first water cooling try.
no color theme

Man that is sweet, really really nice job !!!

[PP Mguire]

My first water cooling try.
no color theme

I have seen alot of people with those brackets holding their rad on. Where do you get them and the screws?

[mrcmark]

I got the bracket from an aluminum shop. They look awful by the way. For the screwa the was the one that came from the rad itself.

[PP Mguire]

IMO they look alot better than the plastic rad boxes. It makes it look like an add on from the case.

[jedihobbit]

Okay, so I'm old, deaf, and now blind!!! Have a pick that shows what y'all are talking about or "paint" a circle around the brackets being disucussed?