Klar Looking for Ivy Bridge Overclock guide
Results 1 to 6 of 6
  1. #1
    Join Date
    Nov 2012
    Posts
    2
    Time Online
    49 Minutes 51 Seconds
    Rep Power
    0


    Default Looking for Ivy Bridge Overclock guide

    Hey All, I am looking for a guide to overclocking my i5 3570K. Currently watercooled and I want a boost for gaming.

    Thanks

  2. #2
    Join Date
    Aug 2006
    Location
    Euless, Texas
    Posts
    11,043
    Time Online
    1 Week 1 Day 19 Hours 3 Minutes 35 Seconds
    Rep Power
    19


    Default

    Unless you have a SLI or Crossfire setup there wont be much in gains from overclocking.

    Overclocking your chip is as simple as raising the multiplier and upping the voltage for stability. If you're motherboard has an online manual with a guide I can show exactly how to do this.
    Univac

    Intel Core i7 3960x @ 4.6GHz | ASRock Extreme 6 x79 | 64GB Kingston HyperX Beast 2133 | GTX 580 SLI |120GB Corsair Neutron GTX | Cooler Master HAF 922 | Custom water loop | Corsair HX850w | Windows 8 Pro MCE x64 | Samsung GS2 Shostock 2 | InFocus 1080p DLP Projector 120" | 24" NEC MultiSync 2470WNX | Logitech G930 | JBL Creature 2 2.1

  3. #3
    peti1212's Avatar
    peti1212 is offline PR Manager/Review Manager Achievements:
    Three FriendsRecommendation Second ClassVeteranTagger Second Class10000 Experience Points
    Awards:
    Most Popular
    Join Date
    Nov 2006
    Location
    California
    Posts
    3,105
    Time Online
    5 Days 16 Hours 56 Minutes 37 Seconds
    Rep Power
    10


    Default

    Really depends on the motherboard. I have an ASUS motherboard, though GIGABYTE is similar, except they do their voltage settings differently. Here is a nice little beginners guide for MSI motherboards done by NCIX:



    For ASUS motherboards, you can just run the OC Tuner and it should put you to about 4-4.2 GHz as a start without having to tweak voltages or anything else.
    Main System (X79 Beast):
    Intel Core i7-3960X @ 4.6GHz | ASUS P9X79 WS | Kingston HyperX Genesis 32GB (8x4GB) DDR3 1600MHz Memory Kit | Nvidia GeForce GTX 690 (Main Card) | GIGABYTE GeForce GTX 650 Ti OC 2GB (Dedicated PhysX card) | ASUS Xonar Xense Audio Card | NZXT Phantom 820 Case | CM Silent Pro Gold 1200W PSU | 2 x Kingston HyperX 240GB 3K SSDs in RAID 0 | 2x WD RE3 1TB Hard Drives | WD Caviar Blue 500GB Hard Drive (Back-up Storage) | Noctua NH-D14 CPU Cooler | Windows 8 Pro

    Test Bench (X79 System):
    Intel Core i7-3820 @ 4.6Ghz | ASUS Rampage IV Extreme | Kingston HyperX 16GB DDR3 2133MHz Memory Kit | XFX HD7870 | Aerocool Striker-X Air test bench | Rosewill Lightning 1300W | LSI 3ware 9750-8i SAS+SATA RAID Card | Kingston HyperX 240GB 5K SSD | Seagate 500GB Hard Drive | Thermaltake Frio OCK CPU Cooler | Windows 8 Pro

    Laptop (Macbook Pro):
    Intel Core i7-2720QM @ 2.2GHz (3.3GHz Turbo) | Kingston HyperX 16GB 1600MHz DDR3 | AMD Radeon HD 6750M 1GB (Dedicated Video Card) | Intel HD Graphics 3000 512MB (Integrated) | Zalman N128GB SSD | Hitachi 500GB 7200 RPM Hard Drive | Mac OS X 10.8.2


  4. #4
    peti1212's Avatar
    peti1212 is offline PR Manager/Review Manager Achievements:
    Three FriendsRecommendation Second ClassVeteranTagger Second Class10000 Experience Points
    Awards:
    Most Popular
    Join Date
    Nov 2006
    Location
    California
    Posts
    3,105
    Time Online
    5 Days 16 Hours 56 Minutes 37 Seconds
    Rep Power
    10


    Default

    Sorry for double post, but couldn't post two videos in one post.

    Here is a good guide for ASUS motherboards:



    The nice thing about ASUS motherboards is that you can adjust the multiplier on your CPU and then keep your VCore voltage at AUTO by just choosing the OFFSET option, and then you just offset the voltage by a few mV, like 0.005V or 0.025V

    As far as GIGABYTE goes, its basically the same thing, adjust multiplier, and then voltage settings. You might want to do a search on youtube for other videos, though the ones I posted cover it fairly well. Hope this helps
    Main System (X79 Beast):
    Intel Core i7-3960X @ 4.6GHz | ASUS P9X79 WS | Kingston HyperX Genesis 32GB (8x4GB) DDR3 1600MHz Memory Kit | Nvidia GeForce GTX 690 (Main Card) | GIGABYTE GeForce GTX 650 Ti OC 2GB (Dedicated PhysX card) | ASUS Xonar Xense Audio Card | NZXT Phantom 820 Case | CM Silent Pro Gold 1200W PSU | 2 x Kingston HyperX 240GB 3K SSDs in RAID 0 | 2x WD RE3 1TB Hard Drives | WD Caviar Blue 500GB Hard Drive (Back-up Storage) | Noctua NH-D14 CPU Cooler | Windows 8 Pro

    Test Bench (X79 System):
    Intel Core i7-3820 @ 4.6Ghz | ASUS Rampage IV Extreme | Kingston HyperX 16GB DDR3 2133MHz Memory Kit | XFX HD7870 | Aerocool Striker-X Air test bench | Rosewill Lightning 1300W | LSI 3ware 9750-8i SAS+SATA RAID Card | Kingston HyperX 240GB 5K SSD | Seagate 500GB Hard Drive | Thermaltake Frio OCK CPU Cooler | Windows 8 Pro

    Laptop (Macbook Pro):
    Intel Core i7-2720QM @ 2.2GHz (3.3GHz Turbo) | Kingston HyperX 16GB 1600MHz DDR3 | AMD Radeon HD 6750M 1GB (Dedicated Video Card) | Intel HD Graphics 3000 512MB (Integrated) | Zalman N128GB SSD | Hitachi 500GB 7200 RPM Hard Drive | Mac OS X 10.8.2


  5. #5
    Join Date
    May 2011
    Location
    Lake Worth, FL
    Posts
    1,302
    Time Online
    1 Week 1 Day 12 Hours 2 Minutes 28 Seconds
    Rep Power
    4


    Default

    Could you tell us what motherboard you have. Also your mobo might have an OC' tuner included.
    RIG:i7-3770k @4.6Ghz/ASUS P8Z77 Deluxe/GSkill DDR3-2400/2xHD7970/Vertex 4/SSonic Plat 1000/H100/HAF XB
    Laptop: i7-3630/ 16GB (4x4) DDR3-1600/ HM77/ GTX 675MX@1050Mhz/ 128GB SSD/ 256GB Vector SSD/ 17in Matte/ Steel Series Keyboard/ Killer Networks/ 1080p
    SERVER: E3-1240V2/TYAN S5512/Kingston DDR3-1600 ECC/LSI Mega9260-4i w/2xVertex4 256GB RAID0(VMFS Datastore)/Vertex3(System)/X650 SSonic Gold/ESXi 5.1





  6. #6
    Join Date
    Nov 2012
    Posts
    91
    Time Online
    6 Hours 8 Minutes 36 Seconds
    Rep Power
    1


    Default

    Make sure you keep a close eye on your temps - the ivy bridge chips get really hot because of the smaller amount of die that they use. Especially when you're doing something intensive like gaming, you really need to watch it - make sure to run a 24 hour torture test w/ Prime 95 to check stability and temps.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Operation Overclock
    By RSS_Poster in forum News
    Replies: 0
    Last Post: 12-14-2011, 05:01 AM
  2. Bjorn3D's guide to folding and FAQ
    By Blacksmith1 in forum Distributive Computing
    Replies: 8
    Last Post: 05-30-2011, 08:17 AM
  3. Windows Vista - A Guide for dummies
    By sushrukh in forum Operating Systems
    Replies: 52
    Last Post: 10-21-2009, 12:34 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •